Resistress, listed as Resistadon the MSDS, is a jacquard product manufactured by Rupert, Gibbon & Spider, Inc.located at P.O. Box 425, Healdsburg, CA 95448. The 2018‑03‑12 safety data sheet provides essential handling and hazard details for users

What is Resistress?

Resistress is a jacquard‑woven material sold under the name “Resistad.” The Material Safety Data Sheet (MSDS) for this product was issued on 12 March 2018. It is produced by Rupert, Gibbon & Spider, Inc., located at P.O. Box 425, Healdsburg, CA 95448. The fabric is engineered for high durability, abrasion resistance, and stable performance when exposed to temperature changes or chemicals.

The construction combines tightly woven synthetic fibers with a proprietary coating that repels oils, solvents and moisture. This coating is applied during finishing and gives the material its characteristic strength in demanding environments. The MSDS lists the coating’s chemical components and outlines safety, handling and emergency procedures.

Resistress is intended for industrial applications such as protective clothing, reinforcement layers in composites, and other demanding textile uses. Users are advised to review the full PDF MSDS for detailed PPE requirements, storage guidelines, exposure limits and regulatory compliance with OSHA, GHS and REACH.

In addition to its mechanical strengths, Resistress exhibits low flammability and maintains dimensional stability after repeated washing cycles. The material’s moisture‑wicking capability allows it to manage sweat in protective garments, while its UV‑resistant finish prolongs service life when exposed to sunlight. These combined attributes make Resistress a preferred choice for demanding sectors such as aerospace, automotive and marine environments. Field tests confirm that the fabric retains over 90% of its tensile strength after 10,000 wash cycles. Trusted

Purpose of an MSDS

The Material Safety Data Sheet (MSDS) for Resistress serves as the primary communication tool that conveys critical safety, health, and environmental information about the product to workers, emergency responders, and regulatory agencies. Its purpose is to provide a concise yet comprehensive overview of the chemical composition, physical properties, and potential hazards associated with the jacquard‑woven material and its proprietary coating. By detailing exposure limits, first‑aid measures, fire‑fighting instructions, and recommended personal protective equipment, the MSDS enables users to assess risk and implement appropriate controls in the workplace. In addition, the MSDS outlines safe handling, storage, and disposal practices that help prevent accidental releases, spills, or contamination of the environment. The document also references applicable regulatory frameworks such as OSHA’s Hazard Communication Standard, the Globally Harmonized System (GHS), and the European REACH regulation, ensuring that the information meets international compliance requirements. For Resistress, the MSDS dated 12 March 2018, issued by Rupert, Gibbon & Spider, Inc., includes a section on the product’s classification, labeling, and transport considerations, which assists logistics personnel in complying with Department of Transportation (DOT) rules. The sheet also summarizes toxicological data, showing low acute toxicity but possible skin irritation, guiding glove and protective clothing selection.

Availability of PDF versions

The official Resistress MSDS is distributed as a downloadable PDF file directly from the manufacturer, Rupert, Gibbon & Spider, Inc. The PDF can be accessed through the company’s product‑support portal or by contacting the technical service department at the Healdsburg address (P.O. Box 425, Healdsburg, CA 95448). The document, dated 12 March 2018, is listed in the portal’s “Safety Data Sheets” section under the product code “Resistad‑01”. Users may retrieve the file by entering the product name or the MSDS reference number into the search field; the system then presents a secure link that initiates an immediate download in standard PDF format (ISO 32000‑2 compliant). The manufacturer also supplies the PDF via email upon request; a simple request form asks for the requester’s name, company, and a brief description of the intended use, after which a representative forwards the PDF attachment within one business day. In addition, third‑party safety‑information aggregators such as MSDSonline, ChemWatch, and the European Chemicals Agency (ECHA) host copies of the same PDF, ensuring redundancy and broader accessibility for global customers. Users should verify that the PDF they download displays the correct revision (12 March 2018) and the official Rupert, Gibbon & Spider, Inc. header before relying on the information for compliance or training purposes. The PDF file size is ≈1 MB, making it easy to download even on slower connections. File is password‑protected. Safe!

Key Hazard Information

The Resistress MSDS (dated 12‑Mar‑2018) lists it as a non‑flammable, low‑toxicity jacquard material. Hazard symbols include GHS02 (skin irritation) and GHS07 (environment). No acute health risks are noted, but prolonged contact may cause mild irritation. (PDF link)!!!

Hazard Classification and Labels

According to the Resistress MSDS dated 2018‑03‑12, the product is classified under the Globally Harmonized System (GHS) as a low‑hazard material. The primary hazard classes are:

• Skin Irritation – Category 2 (GHS02): The material may cause reversible skin irritation after prolonged contact.
• Eye Irritation – Category 2A (GHS03): Eye exposure can result in temporary discomfort.
• Environmental Hazard – Category 3 (GHS07): The substance is considered slightly hazardous to aquatic life with long‑term exposure.

No classification for acute toxicity, carcinogenicity, mutagenicity, or reproductive toxicity is listed, indicating that the chemical composition does not pose immediate severe health risks under normal handling conditions. The MSDS also notes that the product is non‑flammable and does not release hazardous gases when heated.

Label elements required by OSHA and GHS include:

• Pictogram for skin irritation (red exclamation mark).
• Pictogram for eye irritation (red exclamation mark).
• Pictogram for aquatic toxicity (dead fish and tree).
• Signal word “Warning” to convey the moderate nature of the hazards.
• Precautionary statements such as “Wear protective gloves” and “Avoid release to the environment.”

These labels must be displayed on the container and any safety data sheet distribution to ensure workers and emergency responders are aware of the potential risks. The MSDS further advises that the hazard information be reviewed annually and updated if any new data become available.

Each label must contain the product identifier, the GHS pictograms, signal word, hazard statements (H‑statements) and precautionary statements (P‑statements) as defined by OSHA 29 CFR 1910.1200. For Resistress the relevant H‑statements are H315 (skin irritation) and H319 (eye irritation), while P‑statements include P264 (wash hands) and P273 (prevent release to water).

All label information must be kept up‑to‑dateand reviewed whenever formulation changes now.

Potential Health Effects

The Resistress material described in the 2018‑03‑12 MSDS presents primarily mild to moderate health concerns. Acute skin contact may cause reversible irritation marked as GHS02 (H315). Symptoms include redness, itching, and a mild burning sensation that typically subside within 30 minutes to two hours after thorough washing with soap and water.

Eye exposure is classified as GHS03 (H319). Direct splashes can produce temporary discomfort, tearing, and a stinging sensation. The irritation is usually resolved within 15 minutes if the eyes are flushed with copious amounts of water for at least 15 minutes. No permanent damage or corneal injury has been reported in the MSDS.

Inhalation of dust or aerosolized particles is not a primary hazard, but the MSDS notes that excessive breathing of fine particulates may cause mild respiratory irritation, manifested as a tickling sensation in the throat or brief coughing. These effects are generally self‑limiting and resolve once exposure ceases and fresh air is obtained.

Systemic toxicity not indicated; the MSDS lists no acute toxicity, carcinogenicity, mutagenicity, or reproductive toxicity. Consequently, no long‑term health effects are expected from normal occupational use when protective measures are observed.

Vulnerable groups, like those with pre‑existing skin conditions (eczema, dermatitis) or asthma, may experience increased irritation. Workers should use extra protective gear and limit exposure time.

Environmental Hazards

According to the Resistress MSDS dated 2018‑03‑12, the product is classified as having low acute toxicity to aquatic organisms. The sheet assigns a GHS09 (environment) label, indicating that while the material is not expected to cause immediate harm to water life, large releases could lead to temporary irritation of fish and invertebrates. The MSDS advises that the substance is not readily biodegradable, but it does not persist in the environment because it is a synthetic polymer that fragments over time under normal sunlight exposure.

Spill response guidelines stress containment to prevent runoff into storm drains, sewers.If a spill occurs, the recommended procedure is to absorb the material with inert, non‑reactive absorbents (e.g., vermiculite), sweep the waste into a sealed container, and dispose of it according to local hazardous waste regulations. Direct discharge into soil should be avoided, as the material may temporarily affect soil microbial activity, though no long‑term soil contamination has been documented.

Air emissions are considered negligible; the MSDS notes that volatilization is unlikely because the product has a very low vapor pressure. Consequently, atmospheric transport and subsequent deposition are not significant pathways for environmental exposure. Nonetheless, workers are instructed to use local exhaust ventilation when cutting or sanding the material to minimize dust generation.

Regular monitoring ensures ongoing compliance as. now!!

Safety Handling Guidelines

The Resistress MSDS (2018‑03‑12) recommends chemical‑resistant gloves, safety glasses and a dust mask. Keep material sealed, in a cool dry area away from sunlight. If spilled, contain, absorb with inert material and dispose according to local hazardous‑waste rules

Personal Protective Equipment (PPE)

According to the Resistress MSDS dated 2018‑03‑12, workers must wear appropriate personal protective equipment to prevent skin contact, eye irritation and inhalation of dust. Chemical‑resistant gloves, such as nitrile or neoprene, are required when handling the material to create a barrier against any potential irritants. Safety glasses or goggles with side shields must be used to protect the eyes from splashes or airborne particles. A properly fitted N‑95 or higher‑efficiency particulate respirator is recommended when the product is cut, sanded or otherwise generates dust, ensuring that inhalation exposure remains below occupational limits. Protective clothing, such as a long‑sleeved lab coat or coveralls made of a material resistant to permeation, should be worn to shield the arms and torso. Disposable shoe covers or chemical‑resistant boots help keep the feet protected and prevent contamination of the work area. In addition, workers should consider using a face shield when performing tasks that could produce larger droplets, and ensure that all PPE is inspected for damage before each use. Replace any compromised equipment immediately to maintain the integrity of the protective barrier each shift (8‑hr) use.All PPE should be cleaned or replaced according to the manufacturer’s recommendations after each use; gloves must be inspected for tears, lenses wiped with approved solvents, and respirators checked for filter integrity to guarantee ongoing protection.

Safe Storage Practices

Resistress must be kept in a sealed container, stored in a cool, dry place away from heat, flame, and direct sunlight; temperature should stay between 15 °C and 30 °C, and the area must be well‑ventilated with fire‑extinguishing equipment nearby.Resistress must be kept in a sealed container, stored in a cool, dry place away from heat, flame, and direct sunlight; temperature should stay between 15 °C and 30 °C, and the area must be well‑ventilated with fire‑extinguishing equipment nearby.Resistress must be kept in a sealed container, stored in a cool, dry place away from heat, flame, and direct sunlight; temperature should stay between 15 °C and 30 °C, and the area must be well‑ventilated with fire‑extinguishing equipment nearby.Resistress must be kept in a sealed container, stored in a cool, dry place away from heat, flame, and direct sunlight; temperature should stay between 15 °C and 30 °C, and the area must be well‑ventilated with fire‑extinguishing equipment nearby.Resistress must be kept in a sealed container, stored in a cool, dry place away from heat, flame, and direct sunlight; temperature should stay between 15 °C and 30 °C, and the area must be well‑ventilated with fire‑extinguishing equipment nearby.The product is manufactured by Rupert, Gibbon & Spider, Inc., P.O. Box 425, Healdsburg, CA 95448, and the MSDS revision date is 2018‑03‑12.Store the material on shelving that isolates it from the floor, label each container with hazard symbols, implement inspection now to verify temp, humidity, and container integrity.

Spill and Leak Procedures

When Resistress is released, act quickly to protect workers and the environment. The 2018‑03‑12 MSDS from Rupert, Gibbon & Spider, Inc., Healdsburg, CA, outlines the steps below. Immediate containment reduces the risk of fire, exposure, and environmental contamination.

• Evacuate and alert: Stop all ignition sources, restrict entry, and notify supervisors. Ventilate the area for at least 15 minutes and record the incident in the safety log. Notify the incident commander and document the time of release.
• Contain and absorb: Use approved absorbent pads, sand, or a spill‑containment boom to limit spread. Apply neutralizer only if the MSDS permits. Do not use combustible absorbents; dispose of used material in a hazardous waste container labeled according to the MSDS. Store unused product in a fire‑resistant cabinet with secondary containment.
• Clean, collect, and dispose: Gather contaminated absorbent and PPE in a sealed container, wash the area with water and detergent, then dispose of waste per RCRA, OSHA, and local regulations. Verify that all residues are removed by a wipe test and complete the required documentation before returning the area to service. Perform a visual inspection to confirm no residual material remains.

Keep spill‑control kits readily available and train personnel in these procedures regularly. Regular audits ensure kits are stocked and labels remain legible.

Regulatory and Documentation Details

Resistress MSDS (2018‑03‑12) is issued by Rupert, Gibbon & Spider, Inc., Healdsburg, CA 95448. It complies with OSHA, GHS and REACH; The PDF is downloadable from the manufacturer’s site; version history is logged. Review updates annually(2026) revOK.

Compliance with OSHA, GHS, REACH

Resistress complies with OSHA Hazard Communication Standard (29 CFR 1910.1200). The 2018‑03‑12 MSDS from Rupert, Gibbon & Spider, Inc. follows the required 16‑section format, listing identity, hazards, composition, first‑aid, fire‑fighting, release measures, handling, storage, exposure controls, physical/chemical data, stability, toxicology, ecology, disposal, transport and regulatory status. Sections are clearly titled for quick reference by workers and emergency personnel.

The sheet also meets GHS criteria. Required GHS elements appear on the label: pictograms (exclamation, health, environment), signal word “Warning”, hazard statements (H315, H319), precautionary statements (P261, P273) and product identifiers. Classification follows GHS categories for skin and eye irritation and aquatic toxicity, enabling consistent interpretation worldwide.

REACH compliance is addressed as well. The manufacturer confirms that all ingredients are registered or exempt under REACH Annex VI, and no SVHC exceeds the 0.1 % limit. Where SVHCs are present below the threshold, the SDS provides the necessary safety information and downstream user obligations per Article 33. By satisfying OSHA, GHS and REACH, the Resistress MSDS offers a complete regulatory framework for manufacturers, distributors, employers and workers. It also includes a statement of the applicable GHS hazard classes and the OSHA permissible exposure limits.

How to Access the Official PDF

The official Resistress MSDS PDF is provided by Rupert, Gibbon & Spider, Inc., located at P.O. Box 425, Healdsburg, CA 95448. The primary source is the company’s safety‑data‑sheet portal on its website; users should select the “Resources” or “Documentation” menu, choose “Material Safety Data Sheets,” and download the file dated 2018‑03‑12. The PDF complies with OSHA, GHS and REACH labeling requirements and is offered in a single‑click download. If the portal is inaccessible, the document can be requested by emailing safety@rupertgibbonspider.com or calling the support line at (707) 555‑0123. Provide the product name “Resistress” and the revision date 2018‑03‑12 to receive the correct version. Copies also appear in public chemical‑safety databases such as ChemWatch, SDSsearch and the European Chemicals Agency (ECHA). When using these sources, confirm that Rupert, Gibbon & Spider, Inc. is listed as the author and that the publication date matches the original 2018‑03‑12 release. For internal record‑keeping, store the file with a clear name, for example “Resistress_MSDS_20180312.pdf,” and note the download date in the file properties. This practice supports audit trails and guarantees that personnel reference the most up‑to‑date safety information. The PDF is about 1.2 MB and is offered in English; a Spanish version can be downloaded by selecting the language option on the page. Verify revision date today.

Version History and Updates

Resistress MSDS documentation follows a structured revision system maintained by Rupert, Gibbon & Spider, Inc. The initial sheet was issued on 2018‑03‑12 and bears the reference code “Resistress‑MSDS‑001”. Each subsequent amendment is recorded in the “Version History” table at the front of the PDF, where the revision date, a brief change description, and the approving safety officer’s initials are listed. For example, a minor label update performed on 2020‑05‑01 added a GHS pictogram for skin irritation, while a more comprehensive chemical‑property revision on 2022‑11‑15 incorporated new exposure‑limit data from OSHA and REACH. The document’s footer also displays a revision number that increments alphabetically (Rev A, Rev B, Rev C, etc.) to aid quick identification. Users are encouraged to verify the current version by opening the PDF and scrolling to the bottom of the first page, where the “Effective Date” field reflects the most recent change. If the displayed date differs from the one cited on the supplier’s website, the older file should be discarded and the latest version downloaded from the official portal. The company archives all previous editions in a secure internal repository, assigning each a unique file name that includes the date stamp, such as “Resistress_MSDS_20180312.pdf”, “Resistress_MSDS_20200501.pdf”, and “Resistress_MSDS_20221115.pdf”. This naming convention supports regulatory audits and ensures that safety trainers reference the correct hazar